china-tscom

  Reason Analysis of Using AOC Active Optical Cable in Data Center Wiring   40G/100G AOC active optical cable has been globally introduced throughout the data center field. Compared to 40G DAC copper cable, 40G AOC active optical cable has unparalleled advantages in data transmission environment above 7 meters, including the smaller size, lighter weight, easier bending, easier management, longer signal transmission distance, etc. In the data center, the same goals can be achieved with a 40G SR4 optical transceiver. The differences between 40G AOC active optical cable and SR4 optical transceiver are analyzed as follows:   1. Insertion loss analysis of 40G AOC active optical cable and SR4 optical transceiver With the same transmission distance, for SR4 optical transceiver, different optical fiber jumpers that are connected to the same module will produce different insertion loss and return loss, which is basically a common problem. However, as long as the variation is within the range, t

  Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment.   As a quality fiber patch cord manufacturer , fiber patch cord factory , T&S provides types of custom simplex, duplex, single-mode (SM), and multi-mode (MM) fiber patch cords and fiber pigtail assemblies with various types of fiber connectors including ST, FC, SC, LC, MU, MTRJ, E2000 and so on.         Our fiber optic cable patch cord and pigtail range offer choices of any length, connector types, and either PVC or LSZH cable jacket, and all cable assemblies are composed of our top quality ceramic ferrules and fiber connectors housings which ensures stable performance at a high-quality level. Except for standard Fiber Patchcord, we supply other optical patch cord types , including Grade B patch cord, IP68 LC/SC patch cord, LC/SC loopback, outdoor Patchcor

  Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment.   As a quality fiber optic patch cord factory , T&S provides types of custom simplex, duplex, single-mode (SM), and multi-mode (MM) fiber patch cords and fiber pigtail assemblies with various types of fiber connectors including ST, FC, SC, LC, MU, MTRJ, E2000 and so on.         Our fiber optic cable patch cord and pigtail range offer choices of any length, connector types, and either PVC or LSZH cable jacket, and all cable assemblies are composed of our top quality ceramic ferrules and fiber connectors housings which ensures stable performance at a high-quality level. Except for standard Fiber Patchcord, we supply other types of Patch cord, including Grade B patch cord, IP68 LC/SC patch cord, LC/SC loopback, outdoor Patchcord, etc. for different applicatio

  What is a ceramic ferrule? Ferrule plays a significant role in Fiber Connectors as well as Fiber Patchcord. With the characteristics of low insertion loss required for optical transmission, a low value in elasticity coefficient, excellent strength and high resistance to changeable environments, the ceramic fiber ferrule  is usually used in optical connectors.   Having the high durability and the highest levels of dimensional control, these kinds of optical ferrules are available to all fiber applications designated in TIA/EIA-568-B.1 cabling architecture standards. Ceramic ferrule, which is essentially zirconia materials, owns brilliant control over the size. This kind of optical fiber ferrules enables efficient polishing with greater repeatable geometry and a finer surface finish. Proper fiber alignment in zirconia ceramic ferrules is assured through state-of-the-art precision molding/machining of the ferrule ceramic to ensure full contact of fiber ends.   F iber O ptic F errule  Ty

  Pre-terminated multi-fiber optic cables consist of optical fiber cable terminated with various types of connectors, such as the ST, FC, SC, LC, MU, MTRJ, E2000 Connector types. Our polishing craft and expertise ensure excellent optical performance.   As a professional pre-terminated optical communications products  manufacturer, T&S produces multifiber cable  assemblies that are composed of top-quality ceramic ferrules and fiber connector housings. All of our multifiber cables are ensured with a stable performance at a high-quality level.   What Is A Pre-Terminated Cable? Pre-terminated cable systems consist of modular accessories of factory-made cables and connected connectors. All components are tested, qualified, and ready to help you connect the network. Plug and play pre-terminated fiber cable systems have many advantages over field-installed systems That is the reason that the application of factory pre-terminated fiber optic cable continues to grow by percentage for total

  As one of the professional PLC splitter manufacturers, T&S provides a wide range of different fiber optic components at reasonable prices.  Based on Planar Lightwave Circuit technologies, our PLC splitter chips can uniformly divide and guide light in the wavelength ranges from 1260nm to 1650nm. With low insertion loss (IL), low Polarization Dependent Loss (PDL) and high reliability, TS communication  PLC chips have been widely used in FTTx and other optical communication systems.   PLC   C hip  Features Low PDL for PLC chip   Low IL for chip PLC   T&S PLC chip has a wide operating wavelength: 1260-1650nm   Compact size   RoHS compliance     PLC Chip Applications Among all PLC splitter manufacturers, T&S chip PLC can be applied in Optical communication networks, Telecom equipment, Three-Network-Integration systems, including Signal/power distribution, Fiber-To-The-Home (FTTH), Passive Optical Network (PON).

  The MT ferrule is a multi-fiber, plastic ferrule with a square end-face of 6.4x2.5 mm and fiber pitch 0.25mm, widely applied in MPO connectors and AOC cables. 12 and 24-fiber mt ferrules are the most commonly used types. As one of the professional China ferrule manufacturers and suppliers, T&S provides high-quality MT ferrule.   MT Ferrules Features MT ferrules manufactured by high precision mold technology meet international standards such as IEC 61754-3-31, GR-135 etc.   MT MPO Ferrule Dimensions MT is short for mechanical transfer. MT ferrule is a multi-core polyphenylene sulfide ferrule, which is also called PPS ferrule, with a square end-face of 6.4×2.5 mm and 0.25mm pitch between adjacent fiber holes. The alignment mechanism includes two stainless steel guide pins that fit into precisely molded alignment holes.   As one of the professional china ferrule manufacturers , T&S produces 12-core, 16-core and 24-core MT MPO ferrules at different grades like MM Standard, MM low

  Like MTP/MPO cable, MTP/MPO cable shuffle  is also used for connecting MTP modules together as a permanent link, and it also be used with plug-and-play modules or MTP/MPO connector panels to achieve multi-level connection of the extension of the pre-terminated trunk cable by MTP/MPO panel. Normally, the shuffle cables are used to interconnect cassettes, panels, or ruggedized MTP/MPO fanouts, spanning MDA, HDA, and EDA zones. The difference is that its optical fiber routing is formulated according to the requirements of the optical connection at the construction site, which can realize special optical fiber routing different from the conventional polarity, reducing network installation or reconfiguration time and cost.   Features of MTP/MPO Shuffle Cable Low loss performance   Up to 288 fibers – ideal for high-density applications   Available in OS1, OS2, G.657A2, OM3, OM4 Fiber Grades – OM1 and OM2 available upon request   Option for LSZH, OFNP or OFNR cable jacket   100% factory ter