MTP/MPO SHUFFLE CABLE

 Like MTP/MPO cable, MTP/MPO cable shuffle is also used for connecting MTP modules together as a permanent link, and it also be used with plug-and-play modules or MTP/MPO connector panels to achieve multi-level connection of the extension of the pre-terminated trunk cable by MTP/MPO panel. Normally, the shuffle cables are used to interconnect cassettes, panels, or ruggedized MTP/MPO fanouts, spanning MDA, HDA, and EDA zones. The difference is that its optical fiber routing is formulated according to the requirements of the optical connection at the construction site, which can realize special optical fiber routing different from the conventional polarity, reducing network installation or reconfiguration time and cost.

 

Features of MTP/MPO Shuffle Cable

Low loss performance

 

Up to 288 fibers – ideal for high-density applications

 

Available in OS1, OS2, G.657A2, OM3, OM4 Fiber Grades – OM1 and OM2 available upon request

 

Option for LSZH, OFNP or OFNR cable jacket

 

100% factory terminated and tested

 

Pulling eyes are provided as an option to protect the fiber ends during installation

 

Save installation and reconfiguration time

 

Applications of MTP/MPO Shuffle Cable

Data Centers

 

40/100G applications

 

Storage area network- fiber channel

 

Parallel optics

 

InfiniBand

 

The internal connector application in fiber equipment

 

Standards Compliance of MTP/MPO Shuffle Cable

TIA/EIA-568.3-D and ISO/IEC 11801

 

IEC-61754-7 & EIA/TIA-604-5&GR-1435-CORE

 

NFPA 262 or IEC 60332

 

Compliant to Directive 2002/95/EC (RoHS) and REACH SvHC

 

EN 50575

 

InfiniBand Compliant

 

TS communication, established in 2000 and located in Shenzhen, is one of the leading optical communication component manufacturers in China, specializing in developing, manufacturing, marketing an extensive range of optical communications products from passive to active categories for optical communications networks and data centers especially. T&S Communications went public at Shenzhen Stock Exchange in 2016. (Stock Code:300570）

 


评论

发表评论

此博客中的热门博文

PLC Splitter

图片
  FIBER OPTICAL PLC SPLITTER With more than 20 years of experience, T&S always provides high-quality fiber optic plc splitter   that meet your needs and promote efficient, cost-effective network expansion. Whichever cassette splitter   type you choose, you can trust its ability to function at a high level. We lab test our products and use a strict quality system which is more stringent than peers ’   standard to ensure they work properly. Our optical splitters   meet Telcordia GR-1221, Telcordia GR-1209 and G.657A1 industry specifications. All splitters T&S offers can come pre-terminated, making for easy plug-and-play installations. They ’ re ideal for a variety of applications including FTTX Deployments, PON networks, CATV links and so on.   PLC Splitter Planar Lightwave Circuits split optical power evenly over the entire single-mode operating window (1260-1650 nm). Split counts are available from 1x2 up to 2x64 and input/output fibers can be supplied with or without connector
阅读全文

STANDARD CERAMIC FERRULE

图片
  What is a ceramic ferrule? Optical ferrule   plays a significant role in Fiber Connectors as well as Fiber Patchcord. With the characteristics of low insertion loss required for optical transmission, a low value in elasticity coefficient, excellent strength and high resistance to changeable environments, the ceramic ferrule is usually used in optical connectors.   Having the high durability and the highest levels of dimensional control, these kinds of optical fiber ferrules are available to all fiber applications designated in TIA/EIA-568-B.1 cabling architecture standards. Ceramic ferrule, which is essentially zirconia materials, owns brilliant control over the size. This kind of optical fiber ferrules enables efficient polishing with greater repeatable geometry and a finer surface finish. Proper fiber alignment in zirconia ceramic optical ferrules is assured through state-of-the-art precision molding/machining of the ferrule ceramic to ensure full contact of fiber ends.   Fiber Fer
阅读全文

The Features of SC Quick Connector

图片
  The Features of SC Quick Connector   In fiber optic cabling, field connector components are required in some cases. Typical examples are point-to-point installation, field installation, or maintenance. Field Mount Connector (FAOC) also known as fast/quick connector, is an embedded fiber optic connector that can be installed and connected in the field. Fiber optic quick connectors are widely used where fast connections are required, providing fast assembly and stable performance. The construction tools are simple and convenient without power supply and easy to operate, which greatly improves the construction efficiency and reduces the labor cost of FTTH.   The SC fast connector is a common type of field assembly connector for FTTX routing networks. What are the features of the SC fast connector?   Ⅰ . Fiber optic quick connectors can be installed on-site with flexible wiring   The optical fiber wiring project of the FTTX user terminal is many and scattered, and the site construction e
阅读全文