What Are the 40G QSFQ+ Fiber Optical Transceivers and Their Differences?

 

40G networks are widely used in data centers.40g qsfp transceivers are the mainstream devices for interconnection between data center equipment. So what are the main types of 40g optical transceiver? What are the differences between them?

 

The three types of 40G QSFP are 40G QSFP+ SR4, 40G QSFP+ LR4 and 40G QSFP+ PSM LR4. They are all compliant with 40G Ethernet, and data center switches support Infiniband 4xSDR, DDR and QSR. It has four data transmission channels, each with a transmission rate of about 10Gbps, and the simultaneous transmission of four channels can achieve a transmission rate of 40Gbps. It also supports hot-swappable QSFP package with an ultra-low power consumption.

 

1. 40G QSFP+ SR4 transceiver

 

In 40G network transmission, it is usually used with MPO/MTP connectors. It uses multi-mode optical fiber for transmission. When matched with OM3 multi-mode optical fiber jumper, it can support a transmission distance of 100 meters, and when it is matched with multi-mode optical fiber OM4 jumper, it can support a transmission distance of 150 meters;

 

2. 40G QSFP+ LR4 fiber optical transceiver

 

40G QSFP+ LR4 fiber optical transceivers are generally connected with LC connectors, which support hot-swappable electrical interfaces with a lower energy consumption, and support the transmission distance of single-mode optical fiber up to 10km;

 

3. Comparison of 40G QSFP+ SR4 and 40G QSFP+PSM LR4 fiber optical transceivers

 

The 40G QSFP+ PSM LR4 fiber optical transceiver utilizes parallel-designed MPO/MTP interfaces with four full-duplex channels, and can achieve a transmission distance of 2km through 8 independent optical cables with single-mode fibers, and supports power consumption <3.5W.

 

40G QSFP+ SR4 fiber optical transceiver and 40G QSFP+ PSM LR4 transceiver have the same connector type, but 40G QSFP+ SR4 fiber optical transceiver is commonly used for multi-mode fiber transmission, and the transmission distance is short. 40G QSFP+ PSM LR4 fiber optical transceiver is mostly used for single-mode fiber transmission, and the transmission distance is long.

 

4. 40G LR4 PSM fiber optical transceiver

 

The working principle of the 40g qsfp+ aoc cable transceiver is the same as that of the 40G QSFP+ SR4 fiber optical transceiver, which converts the photoelectric signal through the laser array; the 40G LR4 PSM transceiver is suitable for long-distance transmission, and the 40G QSFP+ SR4 fiber optical transceiver is suitable for short-distance transmission.

 

Compared with the 40G QSFP+ SR4 fiber optical transceiver, although both are suitable for long-distance transmission, the 40G LR4 PSM fiber optical transceiver requires 8 single-mode optical fibers for transmission, and the 40G QSFP+ SR4 fiber optical transceiver only uses 2 single-mode optical fibers for transmission.

 

There are many fiber optic transceiver manufacturers, but we are one of the best choices for you.