10G SFP+ AOC
T&S Communication TSPA-85192-xxxC is a Pluggable SFP for 10 Gigabit Ethernet, compliant with the SFF-8431. This transceiver is a high-performance module for short-range data communication and interconnect applications. The length up to 150 m using OM2 MMF or 300 m using OM3 MMF.
Features of China 10G SFP + AOC
Electrical interface compliant to SFF-8431
850nm VCSEL laser and PIN photo-detector
Maximum link length of 150m on OM2 MMF and 300m on OM3 MMF
Hot Pluggable
Built-in digital diagnostic functions
Operating case temperature 0°C to 70°C
RoHS compliant
Applications of 10G SFP + AOC
10G Ethernet, Data Centers
Infiniband transmission
Specifications of 10g Sfp+ Aoc
Storage Temperature | TS | -20 | 85 | °C |
Relative Humidity | RH | 0 | 85 | % |
Case Operating Temperature | TCase | 0 | 70 | °C |
Supply Voltage | VCC | -0.5 | 3.6 | V |
Pin Definitions of 10G SFP + AOC
PIN | Symbol | Name/Description |
1 | VeeT | Transmitter Signal Ground |
2 | TX_FAULT | Transmitter Fault (LVTTL-O) – Not used. Grounded inside the module |
3 | TX_DISABLE | Transmitter Disable (LVTTL-I) – High or open disables the transmitter |
4 | SDA | Two Wire Serial Interface Data Line (LVCMOS – I/O) |
(same as MOD-DEF2 in INF-8074) | ||
5 | SCL | Two Wire Serial Interface Clock Line (LVCMOS – I/O) |
(same as MOD-DEF1 in INF-8074) | ||
6 | MOD_ABS | Module Absent (Output), connected to VeeT or VeeR in the module |
7 | RS0 | Rate Select 0 - Not used, Presents high input impedance. |
8 | RX_LOS | Receiver Loss of Signal (LVTTL-O) |
9 | RS1 | Rate Select 1 - Not used, Presents high input impedance. |
10 | VeeR | Receiver Signal Ground |
11 | VeeR | Receiver Signal Ground |
12 | RD- | Receiver Data Out Inverted (CML-O) |
13 | RD+ | Receiver Data Out (CML-O) |
14 | VeeR | Receiver Signal Ground |
15 | VccR | Receiver Power + 3.3 V |
16 | VccT | Transmitter Power + 3.3 V |
17 | VeeT | Transmitter Signal Ground |
18 | TD+ | Transmitter Data In (CML-I) |
19 | TD- | Transmitter Data In Inverted (CML-I) |
20 | VeeT | Transmitter Signal Ground |
评论
发表评论