MTP®/MPO HARNESS CABLE

 

MTP®/MPO harness cables are a kind of MTP®/MPO fanout harness cable or breakout cable assembly with one MTP®/MPO connector on one end and multiple single-fiber connectors (LC, SC, FC, etc.) on the other end, designed for data distribution and routing to patch panels. It is used to transition from trunk backbone assemblies to fiber rack systems. The MTP® harness cable is fully configurable, available with a variety of cable and connector combinations. For the hardware and equipment in the same cabinet, the longer MPO cord can provide flexibility at any location, and the branch MTP®/MPO cable can be winded into the vertical cable organizer.

 

MTP®/MPO Harness Cable Features

Our MPO/MTP harness cable is with low loss performance.

 

MPO / MTP in 8/12/16/24/32 fibers interfaces for choices.

 

This MTP/MPO fanout harness cable is available in OS1, OS2, G.657A2, OM3, OM4 Fiber Grades – OM1 and OM2 available upon request.

 

Option for LSZH, OFNP or OFNR cable jacket.

 

100% factory terminated and tested.

 

Pulling eyes are provided as an option to protect the fiber ends during installation.

 

Save installation and reconfiguration time.

 

MTP®/MPO Harness Cord Applications

MPO-LC harness cables are dedicated for direct connection between MPO trunk cables and equipment with SFP+ ports via an MPO adapter. Available in polarity A, B or C, these MPO-LC harness cables as well enable connection to SFP+ ports in adjacent racks.

 

MPO-LC harness cables are compatible with all other MPO module cassette-based systems without any loss of optical performance.

 

MPO-LC harness cable is typically constructed with a mini cable that features by small diameter, low weight, and low bend radius. In a typical scenario, it’s used to make connections within the same rack or go-between adjacent racks via overhead cabling trays, slots or open ducting systems.

 

Data Center Interconnect

 

High-Density Fiber Management

 

Telecommunication Networks and CATV networks

 

LAN/WAN Premises

 

Standards Compliance of MTP®/MPO Harness Cable

TIA/EIA-568.3-D and ISO/IEC 11801;

 

IEC-61754 & EIA/TIA-604-5;

 

NFPA 262 or IEC 60332;

 

EN 50575;

 

Our MPO/MTP harness cable complies with GR-1435-CORE, GR-2866-CORE, GR-326-CORE;

 

Our 100g harness cable is compliant to Directive 2002/95/EC (RoHS) and REACH SvHC.

 

Technical Drawings of MTP®/MPO Harness Cable

 

MTP®/MPO Harness Cables Specifications

Construction		Description
Fiber Count		8-288 Fibers
Fiber Mode		Single mode: OS2/G657 9/125um
		Multimode: OM4 50/125um, OM3 50/125um
Fiber Brand		SMF-28® Ultra optical fiber
		Corning ClearCurve®  multimode fiber
Cable Jacket Ratings		Riser (OFNR)
		Plenum (OFNP)
		Low Smoke Zero Halogen (LSZH)
Cable Jacket Color		OS2/G657: Yellow
		OM3: Aqua; OM4: Aqua/Magenta
		or Customized
Polarity		A/B/C or Customized
MTP/	Ferrule	12F/16F/ 24F/32F
MPO	Ferrule Brand	US Conec, HANKUSAN, Nissin
	Connector Type	MTP Female, Male; MPO Female, Male
	Connector Brand	US Conec MTP, Senko MPO, Nissin MPO, Sanwa MPO, FURUKAWA MPO
	Connector Color	Ferrule	SM(APC)	SM(PC)	OM3	OM4	or
		Low loss	Yellow	Yellow	Aqua	Magenta	Customized
		Standard	Green	Blue	Aqua	Magenta
	Boot Color	Green/Black/ or Customized
Single-fiber connector		LC, SC, FC, etc.
Pulling eye		Customized
Operating Temperature		-20°C to +70°C
Storage Temperature		-40°C to +85°C

 

Fiber Count	OD(mm)	Nominal Weight(kg/km)	Max. Tension(N)		Max. Crushing Resistance (N/100)
			Short term	long Term	Short term	long Term
12	3.0±0.1	8.1	150	80	500	150
24	3.0±0.1	8.5	160	80	500	150
24	9.0±0.5	72	500	180	1000	300
36	9.0±0.5	78	500	180	1000	300
48	9.0±0.5	79	600	200	1000	300
60~72	11.2±0.5	126	1000	300	1000	300
96	13.5±0.5	178	1000	300	1000	300
144	17.5±0.5	285	1000	300	1000	300